Skip to main content

Tips for troubleshooting TiDB in Kubernetes

This document describes the commonly used tips for troubleshooting TiDB in Kubernetes.

Use the diagnostic mode​

When a Pod is in the CrashLoopBackoff state, the containers in the Pod exit continually. As a result, you cannot use kubectl exec normally, making it inconvenient to diagnose issues.

To solve this problem, TiDB Operator provides the Pod diagnostic mode for PD, TiKV, and TiDB components. In this mode, the containers in the Pod hang directly after they are started, and will not repeatedly crash. Then you can use kubectl exec to connect to the Pod containers for diagnosis.

To use the diagnostic mode for troubleshooting:

  1. Add an annotation to the Pod to be diagnosed:

    kubectl annotate pod ${pod_name} -n ${namespace} runmode=debug

    When the container in the Pod is restarted again, it will detect this annotation and enter the diagnostic mode.

  2. Wait for the Pod to enter the Running state.

    watch kubectl get pod ${pod_name} -n ${namespace}

    Here's an example of using kubectl exec to get into the container for diagnosis:

    kubectl exec -it ${pod_name} -n ${namespace} -- /bin/sh

  3. After finishing the diagnosis and resolving the problem, delete the Pod.

    kubectl delete pod ${pod_name} -n ${namespace}

After the Pod is rebuilt, it automatically returns to the normal mode.